Home > Glue Potting Machine >

Automatic Grade Automatic 700x700x100 Filtration Potting Machine for Bonding Business

Product Categories

Guangzhou Zhengqi Technology Co., Ltd.

Contact Now

Automatic Grade Automatic 700x700x100 Filtration Potting Machine for Bonding Business

Model NO. : PGB-850

Installation : Vertical

Driven Type : Electric

Transport Package : Polywood Cases

Specification : 700x700x100

Trademark : D&H

Origin : China

HS Code : 8424899990

Supply Ability : 100

After-sales Service : Provided

Precision : High Precision

Condition : New

Certification : RoHS, CE

Warranty : 12 Months

Automatic Grade : Automatic

Customization : Available | Customized Request

Contact Now

Filtration bonding machine business filtration machine bonding AB part potting machine

Where to buy PU , epoxy bonding machine for filtration ?

We Daheng Automation specialize in different types of potting and dispensing system. No matter what your resin application requirements look like: we can do most of them in our fully equipped lab. We can handle 1- and 2-component polyurethanes, epoxies, acrylics, silicones, temperature, humidity and UV curing materials. They can be from low- to high-viscosity, filled or unfilled and even high abrasive for thermal conductivity.

Potting and encapsulation is the process of embedding products & assemblies in a liquid resin (potting compounds) to protect them against rough environment conditions. Potting can be performed in atmosphere pressure or even under vacuum, if high voltage insulation and high temperature differences are needed. Encapsulation of parts will stop corrosion of metals and reduce damage caused by vibration and mechanical stress.

We offer automatic ,se-mi automatic fluid dispensing potting machine and the related production line and vacuuming systems .

Bonding of HEPA filters for interior ventilation systems
HEPA (high-efficiency particulate air) filters
Antimicrobial seals for air conditioning cycling system
Low-emission seals for car interiors and oil filter system
ULPA (ultra-low particulate air) filters application
EPA (efficient particulate air) filter

Automatic Grade Automatic 700x700x100 Filtration Potting Machine for Bonding Business

Filter products gluing requirements :
Adhesives for using in filter manufacturing and the following are descriptions of four physical properties which are the most important factors that should be considered Hardness, viscosity, pot life and percentage of solids.

Using adhesives to fabricate numerous filter components to assemble the filter media itself, bond the filter media into a frame or end cap or install the gasket need .

Pot requirement of the filtration proudcts:

Two-component adhesives, such as epoxies and some polyurethanes, must be mixed at the
plant. Pot life (or liquid life) is an indication of how long these two-part adhesives remain usable once mixed. Both quantity and temperature of the adhesive mixture influence pot life. For example, a quantity of adhesive in a cup will build up heat and cure more quickly - and therefore have a shorter pot life - than the same amount spread into a thin film.Increasing the temperature of the mixture will also shorten pot life.

Two component metering mixing and potting machine can very well to solve this problem.
The amount of glue can be mixed according to the requirements at will, which can be freely set on the equipment. The glue can be mixed while producing the product, without wasting the adhesive, and the bonding requirements can be efficiently achieved.
The equipment contains a heating function, and the required temperature can be set to achieve the bonding requirements for the product easily.

Common types of adhesives

1)Thermosetting adhesives

Thermosetting adhesives typically cure through the chemical reaction of two components or exposure to heat. Once cured, the
adhesive becomes inert. These adhesives tend to have good heat and chemical resistance and are well suited to applications that
require strength under varied conditions. Two common thermosets are epoxy resins and polyurethanes.

2)Epoxy resins
One- and two-part epoxy resins are widely used in filter fabrication for a variety of applications. Most are very rigid in the
cured state and adhere well to metal. Although they offer high temperature and chemical resistance, epoxy resins can be relatively
costly and often cure slowly.

3)Polyurethanes
Adhesive manufacturers offer a broad array of polyurethane adhesives, in varying colours, cure rates, viscosities and hardness levels. Although available in one-part formulations, two-part polyurethanes are better suited to filter applications. Whereas one-part formulations rely on moisture in the substrates and air to cure, two-part polyurethanes cure through a reaction when the two components are combined. Most two-part polyurethanes cure at room temperature but can be heat accelerated. Harder polyurethanes can be used to assemble the filter media into a metal or plastic frame or end cap or cast as those components. Softer versions can serve as a seal between a filter and its housing, eliminating the need for a separate gasket. Polyurethanes lack resistance to some chemicals and solvents so are best used with water, air and oil filters.

Equipment recommended :Applying adhesives for industrial uses is not always as easy as picking up a bottle of glue and squeezing. Two-part adhesives require mixing, and many adhesives used in filter fabrication require separate dispensers.
No matter what resin you are going to use , our company have the indispensable metering mixing dispensing equipment for the applications .
The following mixing and dispensing two-part adhesives.

Simple mixing machine ,Semi-automatic mixing machine

PJL Serious machine example : PJL-800,PJL-1200 ,JYPJ-1000, PJL-1500

The easiest method is to carefully measure the two components by weight or volume to mix
exactly the amount needed ,then operate hold the dispensing gun to apply mixture into proudcts' position where require bonding and potting .

ITEM	Parameter
Mixing ratio	1:1--10:1 adjustable
Working range	Can be Customized
Out-glue speed	1-12g/s per single pump ; the output volume is decided by mixing ratio
Accuracy	±2%(output volume)±2%(mixing)
tolerance	≤0.2mm
Flow control	Digital input
Program memory	20pcs
Automatic controlling system	Touch screen (to achieve program programming, modification, storage and so on
Out-glue control system	AB glue back suction valve, achieve AB glue independent operation
Mixing method	dynamic mixing
Power supply	220V/50Hz/1500W without heating
Air source	0.5-0.8Mpa
Viscosity range	50-20000cps
A tank	10L 25L 40L stainless tank(optional)
B tank	10L 25L 40L stainless tank(optional)
Others	AB tank ,A pump,AB pipeline heating function

Meter mix systems with XYY movable system (Automatic gluing dispensing machine )

PGB serious such like PGB-700 ,PGB-1200,PGB-1500,PGB-2250....

This equipment is designed to mix and dispense adhesives accurately and apply resin to filter accurately by 3-axis dispensing robot.
Some machines dispense only one mix ratio, while our machine can cover a range of ratios.
The filter manufacturer can quickly recoups the investment through using our equipment , since the high productivity can savings the cost for bulk production.

Automatic Grade Automatic 700x700x100 Filtration Potting Machine for Bonding Business

ITEM	Parameter
Mixing ratio	1:1--10:1 adjustable
Working range	Can be customized
Displacement speed	250mm/s(speed)
Out-glue speed	1-12g/s per single pump
Accuracy	±2%(output volume)±2%(mixing)
tolerance	≤0.2mm
Flow control	Digital input
Program memory	99pcs-999pcs
Motion trail	Dot , line ,curve ,circle
Automatic controlling system	Touch screen (to achieve program programming, modification, storage and so on
Out-glue control system	AB glue back suction valve, achieve AB glue independent operation
Programmatically	Tech programming/or computer systems (Micro software Windows 7,Windows10 optional)
Mixing method	dynamic mixing
Power supply	220V/50Hz/1500W without heating
Air source	0.5-0.8Mpa
Viscosity range	50-20000cps
Outer dimension	1500L1200W1600H mm
A tank	10L 25L 40L stainless tank(optional)
B tank	10L 25L 40L stainless tank(optional)
Others	AB tank ,A pump,AB pipeline heating function

Service Term

1, Staff training Seller is responsible to provide machine's training including installation, debugging, maintenance to assured customer can totally use the operation skills and well acknowledge maintenance of machine .

2,Maintenance Service 2.1Seller provide one year warranty period and support free maintenance service during warranty . Software upgrade service is provided for a long life time.

2.2 In case parts of the machine become broken within the warranty because of non-artificial factors, we send you part replacement free, buyer pay for the shipment. Double-liquid valve should be bought at its cost price.

2.3If the parts of the machine become broken past warranty , the parts replacement should be shouldered by buyer.

Product Tags: